Modify Selection
- Hazard prevention and control:
- Span design
- or
- Roof beam design
- or
- Skin control
- or
- Scaling
- or
- Slope design
- or
- Highwall design
- or
- Pillar design
- or
- Support design and selection
Home Links
Results 41 - 50 of 151
-
4/2/2019 - Peer reviewed journal articlesA study on the effect of the discontinuity dip direction on square and rectangular hard rock pillars.
-
1/24/2019 - Peer reviewed journal articlesAn article examining rear abutment extent and loading, along with how well current modeling procedures calculate those values.
-
2/15/2018 - Research projectsA project to make available blast damage models and an easy-to-use software tool for mining engineers to use in developing improved blast designs.
-
8/1/2017 - Peer reviewed journal articlesThis paper evaluates the impact of various pumpable roof support design parameters by examining full-scale performance tests conducted using the NIOSH Mine Roof Simulator (MRS) as part of manufacturers’ developmental and quality control testing.
-
10/22/2016 - Research projectsA project to develop engineering guidelines for support design that will reduce groundfall fatalities under supported roof in underground coal mines.
-
10/22/2016 - Research projectsA project to utilize the capabilities of the Mine Roof Simulator (MRS) Laboratory to test underground roof support and ventilation structures and apply these results to engineer safer products and applications.
-
10/22/2016 - Research projectsA project to update the database of case histories upon which the Analysis of Longwall Pillar Stability (ALPS) software bases its recommended stability factors.
-
10/22/2016 - Research projectsA project to develop guidelines for determining the appropriate level of support and design methods for support systems to minimize the risk and severity of injuries to miners from rib falls in underground coal mines.
-
7/16/2016 - Contracts and cooperative agreementsA capacity-building contract to enhance ground control safety and produce qualified MS and PhD graduates with ground control expertise through improving and extending the LaModel program.
-
5/1/2016 - Peer reviewed journal articlesAn article describing laboratory tests that were conducted to determine the vertical load capacity and deflection of three different types of cross members used in the trusses of coal mine roof support.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program